Passer à la navigation principale Passer à la recherche Passer au contenu principal

Jet noise simulation with realistic nozzle geometries using fully unstructured LES solver

  • Université de Sherbrooke

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

21 Citations (Scopus)

Résumé

Different jet simulations with realistic nozzle geometries for single and dual jets are performed using the fully unstructured Large Eddy Simulation solver AVBP. Two single jet nozzle geometries from NASA are considered: the Single Metal Chevron 000 which is the base line of the series and the Acoustic Reference Nozzle 2 (ARN2). Both are convergent nozzle but with different section variations. Isothermal Mach 0.9 jets at moderate Reynolds number are simulated using these nozzles. The operating condition corresponds to the set point 7 of Tanna matrix. Grids with different resolutions are used and perturbations are injected in boundary layers to get a fully turbulent mixing layer at the nozzle exit. Apart from a laminar to turbulent transition at the nozzle exit, results show a good agreement with experimental data in terms of aerodynamics and acoustics. A co-axial jet nozzle geometry experimentally studied at the P' Institute of Poitiers is also simulated. It is a isothermal configuration with a primary jet Mach number of 0.5 and a secondary jet Mach number of 0.35. This low Mach configuration makes it more challenging as the noise level reduces and the acoustic propagation is slower. For the mean flow quantities, an overall good agreement with experimental measurements is obtained. However the flow dynamics is dominated by a strong vortex pairing phenomenon due to the late laminar to turbulent transition of the mixing layers and the discretization of their interactions on the present grid might be unsufficient. Different jet simulations with realistic nozzle geometries for single and dual jets are performed using the fully unstructured Large Eddy Simulation solver AVBP. Two single jet nozzle geometries from NASA are considered: the Single Metal Chevron 000 which is the base line of the series and the Acoustic Reference Nozzle 2 (ARN2). Both are convergent nozzle but with different section variations. Isothermal Mach 0.9 jets at moderate Reynolds number are simulated using these nozzles. The operating condition corresponds to the set point 7 of Tanna matrix. Grids with different resolutions are used and perturbations are injected in boundary layers to get a fully turbulent mixing layer at the nozzle exit. Apart from a laminar to turbulent transition at the nozzle exit, results show a good agreement with experimental data in terms of aerodynamics and acoustics. A co-axial jet nozzle geometry experimentally studied at the P' Institute of Poitiers is also simulated. It is a isothermal configuration with a primary jet Mach number of 0.5 and a secondary jet Mach number of 0.35. This low Mach configuration makes it more challenging as the noise level reduces and the acoustic propagation is slower. For the mean flow quantities, an overall good agreement with experimental measurements is obtained. However the flow dynamics is dominated by a strong vortex pairing phenomenon due to the late laminar to turbulent transition of the mixing layers and the discretization of their interactions on the present grid might be unsufficient.

Langue originaleAnglais
titre18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference)
EditeurAmerican Institute of Aeronautics and Astronautics Inc.
ISBN (imprimé)9781600869327
Les DOIs
ÉtatPublié - 2012
Modification externeOui
Evénement18th AIAA/CEAS Aeroacoustics Conference 2012 (33rd AIAA Aeroacoustics Conference) - , Etats-Unis
Durée: 4 juin 2012 → 6 juin 2012

Série de publications

Nom18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference)

Conférence

Conférence18th AIAA/CEAS Aeroacoustics Conference 2012 (33rd AIAA Aeroacoustics Conference)
Pays/TerritoireEtats-Unis
Période4/06/12 → 6/06/12

Classification disciplinaire ASJC Scopus

  • Ingénierie aérospatiale
  • Ingénierie mécanique
  • Acoustique et ultrasons

Empreinte digitale

Voici les principaux termes ou expressions associés à « Jet noise simulation with realistic nozzle geometries using fully unstructured LES solver ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource