TY - GEN
T1 - Kinetic model for hot metal pretreatment using lime and magnesium
AU - Moosavi-Khoonsari, Elmira
AU - Van Ende, Marie Aline
AU - Jung, In Ho
N1 - Publisher Copyright:
© ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. All rights reserved.
PY - 2018
Y1 - 2018
N2 - In most plants the desulfurization of hot metal from the blast furnace is practiced using the co-injection of lime and metallic magnesium powders to control low sulfur content in steel. A kinetic model was developed to simulate interactions of the flux particles and slag with the hot metal using the effective equilibrium reaction zone approach in combination with thermodynamic databases in the FactSage system. The process was divided into a finite number of reaction zones, and the effective reaction volumes of each reaction zone were determined as a function of process parameters based on physical descriptions of reaction mechanisms. It is assumed that chemical reactions reach equilibrium in the designated effective reaction zone volumes near the metal/slag/gas interface. Comprehensive, self-consistent and critically assessed thermodynamic databases of liquid iron and oxide systems containing sulfur have been developed over the past few years. This work presents calculated profiles during the powder injection of lime and magnesium in the hot metal ladle. In comparison to plant data [1], the kinetic model could reasonably predict the effect of flux addition and process parameters on the behaviour of sulfur and magnesium in the hot metal.
AB - In most plants the desulfurization of hot metal from the blast furnace is practiced using the co-injection of lime and metallic magnesium powders to control low sulfur content in steel. A kinetic model was developed to simulate interactions of the flux particles and slag with the hot metal using the effective equilibrium reaction zone approach in combination with thermodynamic databases in the FactSage system. The process was divided into a finite number of reaction zones, and the effective reaction volumes of each reaction zone were determined as a function of process parameters based on physical descriptions of reaction mechanisms. It is assumed that chemical reactions reach equilibrium in the designated effective reaction zone volumes near the metal/slag/gas interface. Comprehensive, self-consistent and critically assessed thermodynamic databases of liquid iron and oxide systems containing sulfur have been developed over the past few years. This work presents calculated profiles during the powder injection of lime and magnesium in the hot metal ladle. In comparison to plant data [1], the kinetic model could reasonably predict the effect of flux addition and process parameters on the behaviour of sulfur and magnesium in the hot metal.
KW - Factsage
KW - Hot metal desulfurization
KW - Lime
KW - Metallic magnesium
KW - Powder injection
KW - Process simulation
UR - https://www.scopus.com/pages/publications/85062069428
M3 - Contribution to conference proceedings
AN - SCOPUS:85062069428
T3 - ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0
BT - ICS 2018 - 7th International Congress on Science and Technology of Steelmaking
PB - Associazione Italiana di Metallurgia
T2 - 7th International Congress on Science and Technology of Steelmaking, ICS 2018
Y2 - 13 June 2018 through 15 June 2018
ER -