Passer à la navigation principale Passer à la recherche Passer au contenu principal

Kinetic model for hot metal pretreatment using lime and magnesium

  • Tata Group India
  • Seoul National University

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

Résumé

In most plants the desulfurization of hot metal from the blast furnace is practiced using the co-injection of lime and metallic magnesium powders to control low sulfur content in steel. A kinetic model was developed to simulate interactions of the flux particles and slag with the hot metal using the effective equilibrium reaction zone approach in combination with thermodynamic databases in the FactSage system. The process was divided into a finite number of reaction zones, and the effective reaction volumes of each reaction zone were determined as a function of process parameters based on physical descriptions of reaction mechanisms. It is assumed that chemical reactions reach equilibrium in the designated effective reaction zone volumes near the metal/slag/gas interface. Comprehensive, self-consistent and critically assessed thermodynamic databases of liquid iron and oxide systems containing sulfur have been developed over the past few years. This work presents calculated profiles during the powder injection of lime and magnesium in the hot metal ladle. In comparison to plant data [1], the kinetic model could reasonably predict the effect of flux addition and process parameters on the behaviour of sulfur and magnesium in the hot metal.

Langue originaleAnglais
titreICS 2018 - 7th International Congress on Science and Technology of Steelmaking
Sous-titreThe Challenge of Industry 4.0
EditeurAssociazione Italiana di Metallurgia
ISBN (Electronique)9788898990146
ÉtatPublié - 2018
Modification externeOui
Evénement7th International Congress on Science and Technology of Steelmaking, ICS 2018 - Venice, Italie
Durée: 13 juin 2018 → 15 juin 2018

Série de publications

NomICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0

Conférence

Conférence7th International Congress on Science and Technology of Steelmaking, ICS 2018
Pays/TerritoireItalie
La villeVenice
Période13/06/18 → 15/06/18

Classification disciplinaire ASJC Scopus

  • Métaux et alliages

Empreinte digitale

Voici les principaux termes ou expressions associés à « Kinetic model for hot metal pretreatment using lime and magnesium ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource