Skip to main navigation Skip to search Skip to main content

Laser Powder Bed Fusion And Hot Isostatic Pressing Of Pure Molybdenum: Physical And Mechanical Properties At Elevated Temperatures

  • École de technologie supérieure

Research output: Contribution to Book/Report types › Contribution to conference proceedings › peer-review

Abstract

Molybdenum (Mo) is one of the target materials for laser powder bed fusion additive manufacturing processes. Using the following set of printing parameters: E=179 W; v=133 mm/s; h=60 µm and t=30 µm, crack-free Mo specimens were printed, subjected to hot isostatic pressing (1300°C & 150 MPa for 3 hours), and characterized in terms of their density, structure, and compression behavior at room and elevated temperatures. The results obtained with as-built specimens with a printed density of ~97% and an ultimate compression stress of 486, 242, 264 and 145 MPa at 20, 600, 800 and 1000°C respectively, are comparable to those shown by their counterparts produced by conventional powder metallurgy processes. The selected HIP conditions resulted in a ~1% increase in the part density, but simultaneous porosity evolution and grain coarsening led to a concurrent ~10% decrease in the room and elevated-temperature mechanical properties of printed parts.

Original languageEnglish
Title of host publicationProceedings - Euro PM 2024 Congress and Exhibition
PublisherEuropean Powder Metallurgy Association (EPMA)
ISBN (Electronic)9781899072583
DOIs
Publication statusPublished - 2024
Event2024 European Powder Metallurgy Congress and Exhibition, Euro PM 2024 - Malmo, Sweden
Duration: 29 Sept 2024 → 2 Oct 2024

Publication series

NameProceedings - Euro PM 2024 Congress and Exhibition

Conference

Conference2024 European Powder Metallurgy Congress and Exhibition, Euro PM 2024
Country/TerritorySweden
CityMalmo
Period29/09/24 → 2/10/24

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

ASJC Scopus subject areas

  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Surfaces and Interfaces

Fingerprint

Dive into the research topics of 'Laser Powder Bed Fusion And Hot Isostatic Pressing Of Pure Molybdenum: Physical And Mechanical Properties At Elevated Temperatures'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this