Passer à la navigation principale Passer à la recherche Passer au contenu principal

Laser Powder Bed Fusion And Hot Isostatic Pressing Of Pure Molybdenum: Physical And Mechanical Properties At Elevated Temperatures

  • École de technologie supérieure

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

Résumé

Molybdenum (Mo) is one of the target materials for laser powder bed fusion additive manufacturing processes. Using the following set of printing parameters: E=179 W; v=133 mm/s; h=60 µm and t=30 µm, crack-free Mo specimens were printed, subjected to hot isostatic pressing (1300°C & 150 MPa for 3 hours), and characterized in terms of their density, structure, and compression behavior at room and elevated temperatures. The results obtained with as-built specimens with a printed density of ~97% and an ultimate compression stress of 486, 242, 264 and 145 MPa at 20, 600, 800 and 1000°C respectively, are comparable to those shown by their counterparts produced by conventional powder metallurgy processes. The selected HIP conditions resulted in a ~1% increase in the part density, but simultaneous porosity evolution and grain coarsening led to a concurrent ~10% decrease in the room and elevated-temperature mechanical properties of printed parts.

langue originaleAnglais
titreProceedings - Euro PM 2024 Congress and Exhibition
EditeurEuropean Powder Metallurgy Association (EPMA)
ISBN (Electronique)9781899072583
Les DOIs
étatPublié - 2024
Evénement2024 European Powder Metallurgy Congress and Exhibition, Euro PM 2024 - Malmo, Suède
Durée: 29 sept. 2024 → 2 oct. 2024

Série de publications

NomProceedings - Euro PM 2024 Congress and Exhibition

Conférence

Conférence2024 European Powder Metallurgy Congress and Exhibition, Euro PM 2024
Pays/TerritoireSuède
La villeMalmo
Période29/09/24 → 2/10/24

SDG des Nations Unies

Ce résultat contribue à ou aux Objectifs de développement durable suivants

  1. SDG 9 – Industrie, innovation et infrastructure
    SDG 9 – Industrie, innovation et infrastructure

Classification disciplinaire ASJC Scopus

  • Surfaces, revêtements et films
  • Métaux et alliages
  • Surfaces et interfaces

Empreinte digitale

Voici les principaux termes ou expressions associés à « Laser Powder Bed Fusion And Hot Isostatic Pressing Of Pure Molybdenum: Physical And Mechanical Properties At Elevated Temperatures ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource