Skip to main navigation Skip to search Skip to main content

Microstructural, mechanical, and tribological evaluation of CuAl-based coatings deposited by APS and HVOF

  • C. Bidmeshki
  • , A. C. Liberati
  • , A. Roy
  • , F. Ben Ettouil
  • , C. Moreau
  • , A. I. Encalada
  • , S. A. Alidokht
  • , R. R. Chromik
  • , P. Stoyanov
  • Concordia University
  • McGill University

Research output: Contribution to Book/Report types › Contribution to conference proceedings › peer-review

Abstract

Thermal-sprayed coatings have been extensively used in aerospace with the main purpose to overcome critical challenges such as abrasive wear, corrosion, and erosion under high temperatures and pressures. Such protective coatings can also play a crucial role in optimizing the efficiency of gas turbine engines and therefore in reducing fuel consumption and CO2 emissions. CuAl-based thermal sprayed coatings are commonly employed in tribological interfaces within gas turbine engines to improve the fretting wear resistance. These coatings are typically deposited by more traditional thermal spray techniques such as Air Plasma Spray (APS), which can result in high amounts of oxidation within the coating. The main purpose of this study is to critically evaluate lower temperature deposition techniques such as High Velocity Oxygen Fuel (HVOF). More specifically, commercially available Cu-10Al powders were deposited by APS and HVOF and compared in terms of their microstructural, mechanical properties, and tribological behavior at various temperatures. The results showed that the friction coefficient for both coatings was equivalent at room temperature while it was lower for the APS coating at high temperature. Similarly, the specific wear rates showed little difference between the different deposition processes at room temperature while the APS coating had a lower wear rate at elevated temperature when compared to the HVOF coating. The differences in the friction and wear behavior were attributed to differences in the interfacial processes.

Original languageEnglish
Title of host publicationInternational Thermal Spray Conference and Exposition
Subtitle of host publicationNext-Generation Thermal Spraying for Future Surfaces, ITSC 2023 - Conference Proceedings
EditorsFardad Azarmi, X. Chen, J. Cizek, H. Salimi Jazi, H. Koivuluoto, Y. Lau, R. Ortiz-Fernandez, Ozan C. Ozdemir, F. Toma, J. Veilleux, H. Che
PublisherASM International
Pages46-53
Number of pages8
ISBN (Electronic)9781713879572
DOIs
Publication statusPublished - 2023
Externally publishedYes
Event2023 International Thermal Spray Conference and Exposition, ITSC 2023 - Quebec City, Canada
Duration: 22 May 2023 → 25 May 2023

Publication series

NameInternational Thermal Spray Conference and Exposition: Next-Generation Thermal Spraying for Future Surfaces, ITSC 2023 - Conference Proceedings

Conference

Conference2023 International Thermal Spray Conference and Exposition, ITSC 2023
Country/TerritoryCanada
CityQuebec City
Period22/05/23 → 25/05/23

ASJC Scopus subject areas

  • Metals and Alloys
  • Bioengineering
  • Mechanical Engineering
  • Biomedical Engineering

Fingerprint

Dive into the research topics of 'Microstructural, mechanical, and tribological evaluation of CuAl-based coatings deposited by APS and HVOF'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this