Passer à la navigation principale Passer à la recherche Passer au contenu principal

Microstructural, mechanical, and tribological evaluation of CuAl-based coatings deposited by APS and HVOF

  • C. Bidmeshki
  • , A. C. Liberati
  • , A. Roy
  • , F. Ben Ettouil
  • , C. Moreau
  • , A. I. Encalada
  • , S. A. Alidokht
  • , R. R. Chromik
  • , P. Stoyanov
  • Concordia University
  • McGill University

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

Résumé

Thermal-sprayed coatings have been extensively used in aerospace with the main purpose to overcome critical challenges such as abrasive wear, corrosion, and erosion under high temperatures and pressures. Such protective coatings can also play a crucial role in optimizing the efficiency of gas turbine engines and therefore in reducing fuel consumption and CO2 emissions. CuAl-based thermal sprayed coatings are commonly employed in tribological interfaces within gas turbine engines to improve the fretting wear resistance. These coatings are typically deposited by more traditional thermal spray techniques such as Air Plasma Spray (APS), which can result in high amounts of oxidation within the coating. The main purpose of this study is to critically evaluate lower temperature deposition techniques such as High Velocity Oxygen Fuel (HVOF). More specifically, commercially available Cu-10Al powders were deposited by APS and HVOF and compared in terms of their microstructural, mechanical properties, and tribological behavior at various temperatures. The results showed that the friction coefficient for both coatings was equivalent at room temperature while it was lower for the APS coating at high temperature. Similarly, the specific wear rates showed little difference between the different deposition processes at room temperature while the APS coating had a lower wear rate at elevated temperature when compared to the HVOF coating. The differences in the friction and wear behavior were attributed to differences in the interfacial processes.

Langue originaleAnglais
titreInternational Thermal Spray Conference and Exposition
Sous-titreNext-Generation Thermal Spraying for Future Surfaces, ITSC 2023 - Conference Proceedings
rédacteurs en chefFardad Azarmi, X. Chen, J. Cizek, H. Salimi Jazi, H. Koivuluoto, Y. Lau, R. Ortiz-Fernandez, Ozan C. Ozdemir, F. Toma, J. Veilleux, H. Che
EditeurASM International
Pages46-53
Nombre de pages8
ISBN (Electronique)9781713879572
Les DOIs
ÉtatPublié - 2023
Modification externeOui
Evénement2023 International Thermal Spray Conference and Exposition, ITSC 2023 - Quebec City, Canada
Durée: 22 mai 2023 → 25 mai 2023

Série de publications

NomInternational Thermal Spray Conference and Exposition: Next-Generation Thermal Spraying for Future Surfaces, ITSC 2023 - Conference Proceedings

Conférence

Conférence2023 International Thermal Spray Conference and Exposition, ITSC 2023
Pays/TerritoireCanada
La villeQuebec City
Période22/05/23 → 25/05/23

Classification disciplinaire ASJC Scopus

  • Métaux et alliages
  • Bio-ingénierie
  • Ingénierie mécanique
  • Ingénierie biomédicale

Empreinte digitale

Voici les principaux termes ou expressions associés à « Microstructural, mechanical, and tribological evaluation of CuAl-based coatings deposited by APS and HVOF ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource