Skip to main navigation Skip to search Skip to main content

Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process

  • M. Kavyani
  • , G. R. Ebrahimi
  • , H. R. Ezatpour
  • , M. Jahazi
  • Ferdowsi University of Mashhad
  • Sabzevar University of New Technology

Research output: Contribution to journal › Journal Article › peer-review

79 Citations (Scopus)

Abstract

In this study, the microstructural evolution, mechanical properties and biocorrosion performance of a Mg–Zn–Ca–Mn alloy were investigated under different conditions of heat treatment, extrusion, one pass and two passes of half equal channel angular pressing (HECAP) process. The results showed significant grain refinement of the homogenized alloy after two passes of HECAP process from 345 µm to 2 µm. Field emission scanning electron microscopy (FESEM) revealed the presence of finer Mg6Zn3Ca2 phase as well as α-Mn phase after HECAP process. The results also showed that mechanical characteristics such as yield strength, ultimate tensile strength and elongation of the HECAPed samples improved by ∼208%, ∼144% and ∼100% compared to the homogenized one, respectively. Crystallographic texture analysis indicated that most of the grains at the surface were reoriented parallel to the (0001) basal plane after HECAP process. Electrochemical corrosion tests and immersion results indicated that the sample with two passes of HEACP had the highest biocorrosion resistance confirming that the basal planes had the lowest corrosion rate compared to the non-basal ones. The mechanical behavior and bio-corrosion evaluation demonstrated that the HECAPed Mg–Zn–Ca–Mn alloy has great potential for biomedical applications and a mechanism was proposed to explain the interrelations between the thermomechanical processing and bio-corrosion behavior.

Original languageEnglish
Pages (from-to)1640-1662
Number of pages23
JournalJournal of Magnesium and Alloys
Volume10
Issue number6
DOIs
Publication statusPublished - Jun 2022

Keywords

  • Bio-corrosion performance
  • HECAP process
  • Mechanical properties
  • Mg–Zn–Ca–Mn alloy
  • Microstructure

ASJC Scopus subject areas

  • Mechanics of Materials
  • Metals and Alloys

Fingerprint

Dive into the research topics of 'Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this