Passer à la navigation principale Passer à la recherche Passer au contenu principal

Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process

  • M. Kavyani
  • , G. R. Ebrahimi
  • , H. R. Ezatpour
  • , M. Jahazi
  • Ferdowsi University of Mashhad
  • Sabzevar University of New Technology

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

79 Citations (Scopus)

Résumé

In this study, the microstructural evolution, mechanical properties and biocorrosion performance of a Mg–Zn–Ca–Mn alloy were investigated under different conditions of heat treatment, extrusion, one pass and two passes of half equal channel angular pressing (HECAP) process. The results showed significant grain refinement of the homogenized alloy after two passes of HECAP process from 345 µm to 2 µm. Field emission scanning electron microscopy (FESEM) revealed the presence of finer Mg6Zn3Ca2 phase as well as α-Mn phase after HECAP process. The results also showed that mechanical characteristics such as yield strength, ultimate tensile strength and elongation of the HECAPed samples improved by ∼208%, ∼144% and ∼100% compared to the homogenized one, respectively. Crystallographic texture analysis indicated that most of the grains at the surface were reoriented parallel to the (0001) basal plane after HECAP process. Electrochemical corrosion tests and immersion results indicated that the sample with two passes of HEACP had the highest biocorrosion resistance confirming that the basal planes had the lowest corrosion rate compared to the non-basal ones. The mechanical behavior and bio-corrosion evaluation demonstrated that the HECAPed Mg–Zn–Ca–Mn alloy has great potential for biomedical applications and a mechanism was proposed to explain the interrelations between the thermomechanical processing and bio-corrosion behavior.

Langue originaleAnglais
Pages (de - à)1640-1662
Nombre de pages23
RevueJournal of Magnesium and Alloys
Volume10
Numéro de publication6
Les DOIs
ÉtatPublié - juin 2022

Classification disciplinaire ASJC Scopus

  • Mécanique des matériaux
  • Métaux et alliages

Empreinte digitale

Voici les principaux termes ou expressions associés à « Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource