Process integration and design optimization technologies for modelling improvement

El Mehdi Azzouzi; Mariangela Iuliano; Moncef Hammadi; Regis Plateaux; Francoise Marchand

doi:10.1109/SysEng.2016.7753146

Process integration and design optimization technologies for modelling improvement

El Mehdi Azzouzi
, Mariangela Iuliano
, Moncef Hammadi
, Regis Plateaux
, Francoise Marchand

LISMMA

Research output: Contribution to Book/Report types › Contribution to conference proceedings › peer-review

1 Citation (Scopus)

Abstract

This paper aims to present a methodology that helps improving systems modelling by using Process Integration and Design Optimization technologies. Then, the methodology has been applied on an automotive case study: The improvement of the hybrid vehicle TOYOTA PRIUS III modelling. This work has been carried out in the context of the international research program PLACIS (PLAteforme Collaborative d'Ingénierie Système). It is the result of the collaboration between Institut Polytechnique Grand Paris and Esslingen University. The experimental data needed for the study were measured on a test bench and a detailed model developed in DYMOLA-MODELICA environment of the vehicle powertrain was given by the company Bosch. Thereby, in order to develop and validate the model, an optimization tool was used to identify the unknown parameters of the system and integrate the energy data management into the simulation.

Original language	English
Title of host publication	ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781509007936
DOIs	https://doi.org/10.1109/SysEng.2016.7753146
Publication status	Published - 22 Nov 2016
Externally published	Yes
Event	2nd Annual IEEE International Symposium on Systems Engineering, ISSE 2016 - Edinburgh, United Kingdom Duration: 3 Oct 2016 → 5 Oct 2016

Publication series

Name	ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers

Conference

Conference	2nd Annual IEEE International Symposium on Systems Engineering, ISSE 2016
Country/Territory	United Kingdom
City	Edinburgh
Period	3/10/16 → 5/10/16

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

!!!Keywords

DYMOLA-MODELICA
Design Optimization
Modelling
PLACIS
Process Integration
Simulation
Toyota Prius
hybrid vehicle
powertrain

Access to Document

10.1109/SysEng.2016.7753146

Cite this

Azzouzi, E. M., Iuliano, M., Hammadi, M., Plateaux, R., & Marchand, F. (2016). Process integration and design optimization technologies for modelling improvement. In ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers Article 7753146 (ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SysEng.2016.7753146

Azzouzi, El Mehdi ; Iuliano, Mariangela ; Hammadi, Moncef et al. / Process integration and design optimization technologies for modelling improvement. ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers. Institute of Electrical and Electronics Engineers Inc., 2016. (ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers).

@inproceedings{9dacb87ba1594378834fb634fa46192f,

title = "Process integration and design optimization technologies for modelling improvement",

abstract = "This paper aims to present a methodology that helps improving systems modelling by using Process Integration and Design Optimization technologies. Then, the methodology has been applied on an automotive case study: The improvement of the hybrid vehicle TOYOTA PRIUS III modelling. This work has been carried out in the context of the international research program PLACIS (PLAteforme Collaborative d'Ing{\'e}nierie Syst{\`e}me). It is the result of the collaboration between Institut Polytechnique Grand Paris and Esslingen University. The experimental data needed for the study were measured on a test bench and a detailed model developed in DYMOLA-MODELICA environment of the vehicle powertrain was given by the company Bosch. Thereby, in order to develop and validate the model, an optimization tool was used to identify the unknown parameters of the system and integrate the energy data management into the simulation.",

keywords = "DYMOLA-MODELICA, Design Optimization, Modelling, PLACIS, Process Integration, Simulation, Toyota Prius, hybrid vehicle, powertrain",

author = "Azzouzi, \{El Mehdi\} and Mariangela Iuliano and Moncef Hammadi and Regis Plateaux and Francoise Marchand",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 2nd Annual IEEE International Symposium on Systems Engineering, ISSE 2016 ; Conference date: 03-10-2016 Through 05-10-2016",

year = "2016",

month = nov,

day = "22",

doi = "10.1109/SysEng.2016.7753146",

language = "English",

series = "ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers",

}

Azzouzi, EM, Iuliano, M, Hammadi, M, Plateaux, R & Marchand, F 2016, Process integration and design optimization technologies for modelling improvement. in ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers., 7753146, ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers, Institute of Electrical and Electronics Engineers Inc., 2nd Annual IEEE International Symposium on Systems Engineering, ISSE 2016, Edinburgh, United Kingdom, 3/10/16. https://doi.org/10.1109/SysEng.2016.7753146

Process integration and design optimization technologies for modelling improvement. / Azzouzi, El Mehdi; Iuliano, Mariangela; Hammadi, Moncef et al.
ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers. Institute of Electrical and Electronics Engineers Inc., 2016. 7753146 (ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers).

Research output: Contribution to Book/Report types › Contribution to conference proceedings › peer-review

TY - GEN

T1 - Process integration and design optimization technologies for modelling improvement

AU - Azzouzi, El Mehdi

AU - Iuliano, Mariangela

AU - Hammadi, Moncef

AU - Plateaux, Regis

AU - Marchand, Francoise

PY - 2016/11/22

Y1 - 2016/11/22

N2 - This paper aims to present a methodology that helps improving systems modelling by using Process Integration and Design Optimization technologies. Then, the methodology has been applied on an automotive case study: The improvement of the hybrid vehicle TOYOTA PRIUS III modelling. This work has been carried out in the context of the international research program PLACIS (PLAteforme Collaborative d'Ingénierie Système). It is the result of the collaboration between Institut Polytechnique Grand Paris and Esslingen University. The experimental data needed for the study were measured on a test bench and a detailed model developed in DYMOLA-MODELICA environment of the vehicle powertrain was given by the company Bosch. Thereby, in order to develop and validate the model, an optimization tool was used to identify the unknown parameters of the system and integrate the energy data management into the simulation.

AB - This paper aims to present a methodology that helps improving systems modelling by using Process Integration and Design Optimization technologies. Then, the methodology has been applied on an automotive case study: The improvement of the hybrid vehicle TOYOTA PRIUS III modelling. This work has been carried out in the context of the international research program PLACIS (PLAteforme Collaborative d'Ingénierie Système). It is the result of the collaboration between Institut Polytechnique Grand Paris and Esslingen University. The experimental data needed for the study were measured on a test bench and a detailed model developed in DYMOLA-MODELICA environment of the vehicle powertrain was given by the company Bosch. Thereby, in order to develop and validate the model, an optimization tool was used to identify the unknown parameters of the system and integrate the energy data management into the simulation.

KW - DYMOLA-MODELICA

KW - Design Optimization

KW - Modelling

KW - PLACIS

KW - Process Integration

KW - Simulation

KW - Toyota Prius

KW - hybrid vehicle

KW - powertrain

UR - https://www.scopus.com/pages/publications/85006391763

U2 - 10.1109/SysEng.2016.7753146

DO - 10.1109/SysEng.2016.7753146

M3 - Contribution to conference proceedings

AN - SCOPUS:85006391763

T3 - ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers

BT - ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2nd Annual IEEE International Symposium on Systems Engineering, ISSE 2016

Y2 - 3 October 2016 through 5 October 2016

ER -

Azzouzi EM, Iuliano M, Hammadi M, Plateaux R, Marchand F. Process integration and design optimization technologies for modelling improvement. In ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers. Institute of Electrical and Electronics Engineers Inc. 2016. 7753146. (ISSE 2016 - 2016 International Symposium on Systems Engineering - Proceedings Papers). doi: 10.1109/SysEng.2016.7753146

Process integration and design optimization technologies for modelling improvement

Abstract

Publication series

Conference

UN SDGs

!!!Keywords

Access to Document

Other files and links

Fingerprint

Cite this