Abstract
A total of 23 asphalt binders were obtained from around the country. Contractors that reported emission complaints from neighbors were asked to supply samples from problem binders as well as a sample of asphalt binders, when used, generated either fewer or no complaints. The percent mass loss and opacity measurements were used to determine if a simple means of identifying asphalt binders with emission potential could be identified for use as a screening or process control test for the contractors. Results indicate that a maximum mass loss of 0.5% as measured with the rolling thin film oven test or 0.7% as measured with a prototype emissions oven will minimize emission potential. The prototype oven was fitted with an opacity meter; a percent mass loss of 0.7% or lower corresponds with visible emissions of 1.2% or less. Most of the asphalt binders rated with high emissions problems by the contractor are identified by using these limits.
| Original language | English |
|---|---|
| Pages (from-to) | 191-200 |
| Number of pages | 10 |
| Journal | International Journal of Pavement Engineering |
| Volume | 6 |
| Issue number | 3 |
| DOIs | |
| Publication status | Published - Sept 2005 |
| Externally published | Yes |
!!!Keywords
- Asphalt binders
- Odor
- Prototype
- Volatile organic compounds
Fingerprint
Dive into the research topics of 'Quantification of emission potential from asphalt binders using mass loss and opacity measurements'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver