Résumé
A total of 23 asphalt binders were obtained from around the country. Contractors that reported emission complaints from neighbors were asked to supply samples from problem binders as well as a sample of asphalt binders, when used, generated either fewer or no complaints. The percent mass loss and opacity measurements were used to determine if a simple means of identifying asphalt binders with emission potential could be identified for use as a screening or process control test for the contractors. Results indicate that a maximum mass loss of 0.5% as measured with the rolling thin film oven test or 0.7% as measured with a prototype emissions oven will minimize emission potential. The prototype oven was fitted with an opacity meter; a percent mass loss of 0.7% or lower corresponds with visible emissions of 1.2% or less. Most of the asphalt binders rated with high emissions problems by the contractor are identified by using these limits.
| Langue originale | Anglais |
|---|---|
| Pages (de - à) | 191-200 |
| Nombre de pages | 10 |
| Revue | International Journal of Pavement Engineering |
| Volume | 6 |
| Numéro de publication | 3 |
| Les DOIs | |
| État | Publié - sept. 2005 |
| Modification externe | Oui |
Classification disciplinaire ASJC Scopus
- Génie civil et structurel
- Mécanique des matériaux
Empreinte digitale
Voici les principaux termes ou expressions associés à « Quantification of emission potential from asphalt binders using mass loss and opacity measurements ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.Citer cette ressource
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver