Abstract
In this paper, rapid prototyping techniques for microfluidic master mold fabrication, using copper clads micromachining and 3D printing technologies are presented. Copper clad is a promising material for microfluidic mold fabrication due to its: smooth surface, availability of different copper and dielectric layer thicknesses, affordability and easiness of machining. In addition, 3D printing technology was investigated as a rapid prototyping technique to achieve appropriate master mold fabrication. Several molds with different channel features (width and height) were fabricated from each technique and were compared from the stand point of channel resolution, minimum space between channels, surface roughness, fabrication time and cost. Finally, microfluidic chips were fabricated using those molds by using molding technique based on Poly (dimethylsiloxane) (PDMS). The collection of these techniques offers precise channel heights starting from 15 m and different channel width ranging from 50 m in a short time fabrication process (i.e., 5min), without needing clean room equipment for molds fabrication.
| Original language | English |
|---|---|
| Title of host publication | 2018 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| Pages | 385-389 |
| Number of pages | 5 |
| ISBN (Electronic) | 9781538615133 |
| DOIs | |
| Publication status | Published - 21 Dec 2018 |
| Externally published | Yes |
| Event | 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 - Montreal, Canada Duration: 24 Jun 2018 → 27 Jun 2018 |
Publication series
| Name | 2018 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 |
|---|
Conference
| Conference | 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 |
|---|---|
| Country/Territory | Canada |
| City | Montreal |
| Period | 24/06/18 → 27/06/18 |
UN SDGs
This output contributes to the following UN Sustainable Development Goals (SDGs)
-
SDG 9 Industry, Innovation, and Infrastructure
Keywords
- Microfabrication
- PDMS
- PDMS bonding
- Rapid prototyping
- microfluidics
- micromachining
ASJC Scopus subject areas
- Computer Networks and Communications
- Signal Processing
- Electrical and Electronic Engineering
- Instrumentation
Fingerprint
Dive into the research topics of 'Rapid prototyping of microfluidic devices and their applications'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver