Résumé
In this paper, rapid prototyping techniques for microfluidic master mold fabrication, using copper clads micromachining and 3D printing technologies are presented. Copper clad is a promising material for microfluidic mold fabrication due to its: smooth surface, availability of different copper and dielectric layer thicknesses, affordability and easiness of machining. In addition, 3D printing technology was investigated as a rapid prototyping technique to achieve appropriate master mold fabrication. Several molds with different channel features (width and height) were fabricated from each technique and were compared from the stand point of channel resolution, minimum space between channels, surface roughness, fabrication time and cost. Finally, microfluidic chips were fabricated using those molds by using molding technique based on Poly (dimethylsiloxane) (PDMS). The collection of these techniques offers precise channel heights starting from 15 m and different channel width ranging from 50 m in a short time fabrication process (i.e., 5min), without needing clean room equipment for molds fabrication.
| Langue originale | Anglais |
|---|---|
| titre | 2018 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 |
| Editeur | Institute of Electrical and Electronics Engineers Inc. |
| Pages | 385-389 |
| Nombre de pages | 5 |
| ISBN (Electronique) | 9781538615133 |
| Les DOIs | |
| État | Publié - 21 déc. 2018 |
| Modification externe | Oui |
| Evénement | 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 - Montreal, Canada Durée: 24 juin 2018 → 27 juin 2018 |
Série de publications
| Nom | 2018 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 |
|---|
Conférence
| Conférence | 16th IEEE International New Circuits and Systems Conference, NEWCAS 2018 |
|---|---|
| Pays/Territoire | Canada |
| La ville | Montreal |
| Période | 24/06/18 → 27/06/18 |
SDG des Nations Unies
Ce résultat contribue à ou aux Objectifs de développement durable suivants
-
SDG 9 – Industrie, innovation et infrastructure
Classification disciplinaire ASJC Scopus
- Réseaux informatiques et communications
- Traitement du signal
- Ingénierie électrique et électronique
- Instrumentation
Empreinte digitale
Voici les principaux termes ou expressions associés à « Rapid prototyping of microfluidic devices and their applications ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.Citer cette ressource
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver