Abstract
An investigation of resistance welding of thermoplastic composites skin/stringer specimens is presented. Skin/stringer configurations with square-ended and 20° taper-ended flanges were resistance-welded using a metal mesh heating element. The skin and stringer laminates were made of 16-ply APC-2/AS4 PEEK/carbon fiber composite. The objective of this work was to study the feasibility of resistance welding to assemble aerospace structures with non-uniform cross-sections such as a taper-ended skin/stringer configuration. Combinations of different clamping distances and power levels were used. The welded specimens were analyzed using short beam tests, ultrasonic inspections and optical and scanning electron microscopy. The mechanical performance of the skin/stringer configuration was evaluated by three-point bending tests. Comparison between resistance-welded tapered and square-ended specimens was performed and better performance was obtained with the taper-ended specimens.
| Original language | English |
|---|---|
| Journal | International SAMPE Symposium and Exhibition (Proceedings) |
| Volume | 51 |
| Publication status | Published - 2006 |
| Externally published | Yes |
| Event | SAMPE '06: Creating New Opportunities For The World Economy - Long Beach, CA, United States Duration: 30 Apr 2006 → 4 May 2006 |
Keywords
- Mechanical properties
- Polyetheretherketone (PEEK)
- Welding/thermal joining
ASJC Scopus subject areas
- General Materials Science
- Mechanics of Materials
- Mechanical Engineering
Fingerprint
Dive into the research topics of 'Resistance welding of thermoplastic composite skin/stringer specimens'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver