Passer à la navigation principale Passer à la recherche Passer au contenu principal

Resistance welding of thermoplastic composite skin/stringer specimens

  • Martine Dubé
  • , Pascal Hubert
  • , Ali Yousefpour
  • , Johanne Denault
  • , Matthew Wadham-Gagnon
  • McGill University
  • National Research Council of Canada

Résultats de recherche: Contribution à un journal › Article de conférence › Revue par des pairs

3 Citations (Scopus)

Résumé

An investigation of resistance welding of thermoplastic composites skin/stringer specimens is presented. Skin/stringer configurations with square-ended and 20° taper-ended flanges were resistance-welded using a metal mesh heating element. The skin and stringer laminates were made of 16-ply APC-2/AS4 PEEK/carbon fiber composite. The objective of this work was to study the feasibility of resistance welding to assemble aerospace structures with non-uniform cross-sections such as a taper-ended skin/stringer configuration. Combinations of different clamping distances and power levels were used. The welded specimens were analyzed using short beam tests, ultrasonic inspections and optical and scanning electron microscopy. The mechanical performance of the skin/stringer configuration was evaluated by three-point bending tests. Comparison between resistance-welded tapered and square-ended specimens was performed and better performance was obtained with the taper-ended specimens.

langue originaleAnglais
journalInternational SAMPE Symposium and Exhibition (Proceedings)
Volume51
étatPublié - 2006
Modification externeOui
EvénementSAMPE '06: Creating New Opportunities For The World Economy - Long Beach, CA, Etats-Unis
Durée: 30 avr. 2006 → 4 mai 2006

Empreinte digitale

Voici les principaux termes ou expressions associés à « Resistance welding of thermoplastic composite skin/stringer specimens ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource