Skip to main navigation Skip to search Skip to main content

Structure and Properties of Ti–50.2Ni Alloy Processed by Laser Powder Bed Fusion and Subjected to a Combination of Thermal Cycling and Heat Treatments

  • M. Tsaturyants
  • , V. Sheremetyev
  • , S. Dubinskiy
  • , V. Komarov
  • , K. Polyakova
  • , A. Korotitskiy
  • , S. Prokoshkin
  • , E. Borisov
  • , K. Starikov
  • , D. Kaledina
  • , A. Popovich
  • , V. Brailovski
  • National University of Science and Technology "MISiS"
  • École de technologie supérieure
  • Peter the Great St. Petersburg Polytechnic University

Research output: Contribution to journal › Journal Article › peer-review

17 Citations (Scopus)

Abstract

The influence of different combinations of heat treatments at 350 and 400 °C with heating–cooling cycling across the temperature range of martensitic transformation on the structural, mechanical, and functional properties of the laser powder bed-fused Ti–50.2Ni (at.%) shape memory alloy was studied. Transformation-induced hardening caused by thermal cycling decreases the temperature range of martensitic transformation by 10–15 °C and changes the forward transformation sequence from B2 → B19′ to B2 → R → B19′. Moreover, thermal cycling with 10 and more cycles increases the mechanical properties, namely the maximum stress from 726 to 780 MPa, the dislocation yield stress from 642 to 690 MPa, and the difference between the dislocation and transformation yield stresses, from 488 to 517 MPa. Finally, annealing at 350 °C followed by 100 heating–cooling cycles increase the total recovery strain from 8.1 to 8.9% and the maximum recovery stress, from 375 to 590 MPa. It is therefore concluded that heating–cooling cycling through the temperature range of martensitic transformation represents a useful complement to conventional annealing for improving the functional properties of laser powder bed-fused Ti–Ni shape memory alloys.

Original languageEnglish
Pages (from-to)16-32
Number of pages17
JournalShape Memory and Superelasticity
Volume8
Issue number1
DOIs
Publication statusPublished - Mar 2022

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • NiTi materials
  • SMA
  • Shape memory
  • Thermal cycling

ASJC Scopus subject areas

  • General Materials Science
  • Mechanics of Materials

Fingerprint

Dive into the research topics of 'Structure and Properties of Ti–50.2Ni Alloy Processed by Laser Powder Bed Fusion and Subjected to a Combination of Thermal Cycling and Heat Treatments'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this