Passer à la navigation principale Passer à la recherche Passer au contenu principal

Structure and Properties of Ti–50.2Ni Alloy Processed by Laser Powder Bed Fusion and Subjected to a Combination of Thermal Cycling and Heat Treatments

  • M. Tsaturyants
  • , V. Sheremetyev
  • , S. Dubinskiy
  • , V. Komarov
  • , K. Polyakova
  • , A. Korotitskiy
  • , S. Prokoshkin
  • , E. Borisov
  • , K. Starikov
  • , D. Kaledina
  • , A. Popovich
  • , V. Brailovski
  • National University of Science and Technology "MISiS"
  • École de technologie supérieure
  • Peter the Great St. Petersburg Polytechnic University

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

17 Citations (Scopus)

Résumé

The influence of different combinations of heat treatments at 350 and 400 °C with heating–cooling cycling across the temperature range of martensitic transformation on the structural, mechanical, and functional properties of the laser powder bed-fused Ti–50.2Ni (at.%) shape memory alloy was studied. Transformation-induced hardening caused by thermal cycling decreases the temperature range of martensitic transformation by 10–15 °C and changes the forward transformation sequence from B2 → B19′ to B2 → R → B19′. Moreover, thermal cycling with 10 and more cycles increases the mechanical properties, namely the maximum stress from 726 to 780 MPa, the dislocation yield stress from 642 to 690 MPa, and the difference between the dislocation and transformation yield stresses, from 488 to 517 MPa. Finally, annealing at 350 °C followed by 100 heating–cooling cycles increase the total recovery strain from 8.1 to 8.9% and the maximum recovery stress, from 375 to 590 MPa. It is therefore concluded that heating–cooling cycling through the temperature range of martensitic transformation represents a useful complement to conventional annealing for improving the functional properties of laser powder bed-fused Ti–Ni shape memory alloys.

Langue originaleAnglais
Pages (de - à)16-32
Nombre de pages17
RevueShape Memory and Superelasticity
Volume8
Numéro de publication1
Les DOIs
ÉtatPublié - mars 2022

SDG des Nations Unies

Ce résultat contribue à ou aux Objectifs de développement durable suivants

  1. SDG 9 – Industrie, innovation et infrastructure
    SDG 9 – Industrie, innovation et infrastructure

Classification disciplinaire ASJC Scopus

  • Sciences générales des matériaux
  • Mécanique des matériaux

Empreinte digitale

Voici les principaux termes ou expressions associés à « Structure and Properties of Ti–50.2Ni Alloy Processed by Laser Powder Bed Fusion and Subjected to a Combination of Thermal Cycling and Heat Treatments ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource