TY - GEN
T1 - Using powder rheology measurements to optimize the mixing time of iron-based premixes for best die filling performance
AU - Nijikovsky, Boris
AU - Brailovski, Vladimir
AU - Aguirre Perales, Lydia Y.
AU - Paris, Vincent
N1 - Publisher Copyright:
© 2019 Metal Powder Industries Federation.
PY - 2020
Y1 - 2020
N2 - A previously unreported approach to optimize the time of an industry scale mixing operation for best filling performance, while ensuring premix uniformity, is devised and tested. Mixing a base metal powder with a lubricant facilitates compacting and ejecting of powder compacts. However, lubricant admixing entails utmost technological implications for premix flowability, since admixing directly influences the die filling performance of the premix. Insufficient mixing leads to non-uniform lubricant distribution, while excessive mixing causes demixing or flowability degradation issues. A 1500 L double cone blender was used to prepare premixes with different base powders, additives and lubricants. For each premix, the optimum mixing time was estimated using a set of powder rheology measurements. It was then validated through conventional premix flowability and uniformity tests including Hall flowrate and burn-off-based probing of lubricant distribution, respectively. A streamlined subset of the performed characterization steps for the optimization of other premix formulations is proposed.
AB - A previously unreported approach to optimize the time of an industry scale mixing operation for best filling performance, while ensuring premix uniformity, is devised and tested. Mixing a base metal powder with a lubricant facilitates compacting and ejecting of powder compacts. However, lubricant admixing entails utmost technological implications for premix flowability, since admixing directly influences the die filling performance of the premix. Insufficient mixing leads to non-uniform lubricant distribution, while excessive mixing causes demixing or flowability degradation issues. A 1500 L double cone blender was used to prepare premixes with different base powders, additives and lubricants. For each premix, the optimum mixing time was estimated using a set of powder rheology measurements. It was then validated through conventional premix flowability and uniformity tests including Hall flowrate and burn-off-based probing of lubricant distribution, respectively. A streamlined subset of the performed characterization steps for the optimization of other premix formulations is proposed.
UR - https://www.scopus.com/pages/publications/85081096890
M3 - Contribution to conference proceedings
AN - SCOPUS:85081096890
T3 - Advances in Powder Metallurgy and Particulate Materials - 2019: Proceedings of the 2019 International Conference on Powder Metallurgy and Particulate Materials
SP - 683
EP - 703
BT - Advances in Powder Metallurgy and Particulate Materials - 2019
PB - Metal Powder Industries Federation
T2 - 2019 International Conference on Powder Metallurgy and Particulate Materials, POWDERMET 2019
Y2 - 23 June 2019 through 26 June 2019
ER -