Passer à la navigation principale Passer à la recherche Passer au contenu principal

Using powder rheology measurements to optimize the mixing time of iron-based premixes for best die filling performance

  • École de technologie supérieure
  • Technology center

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

Résumé

A previously unreported approach to optimize the time of an industry scale mixing operation for best filling performance, while ensuring premix uniformity, is devised and tested. Mixing a base metal powder with a lubricant facilitates compacting and ejecting of powder compacts. However, lubricant admixing entails utmost technological implications for premix flowability, since admixing directly influences the die filling performance of the premix. Insufficient mixing leads to non-uniform lubricant distribution, while excessive mixing causes demixing or flowability degradation issues. A 1500 L double cone blender was used to prepare premixes with different base powders, additives and lubricants. For each premix, the optimum mixing time was estimated using a set of powder rheology measurements. It was then validated through conventional premix flowability and uniformity tests including Hall flowrate and burn-off-based probing of lubricant distribution, respectively. A streamlined subset of the performed characterization steps for the optimization of other premix formulations is proposed.

Langue originaleAnglais
titreAdvances in Powder Metallurgy and Particulate Materials - 2019
Sous-titreProceedings of the 2019 International Conference on Powder Metallurgy and Particulate Materials
EditeurMetal Powder Industries Federation
Pages683-703
Nombre de pages21
ISBN (Electronique)9781943694211
ÉtatPublié - 2020
Evénement2019 International Conference on Powder Metallurgy and Particulate Materials, POWDERMET 2019 - Phoenix, Etats-Unis
Durée: 23 juin 2019 → 26 juin 2019

Série de publications

NomAdvances in Powder Metallurgy and Particulate Materials - 2019: Proceedings of the 2019 International Conference on Powder Metallurgy and Particulate Materials

Conférence

Conférence2019 International Conference on Powder Metallurgy and Particulate Materials, POWDERMET 2019
Pays/TerritoireEtats-Unis
La villePhoenix
Période23/06/19 → 26/06/19

Classification disciplinaire ASJC Scopus

  • Métaux et alliages
  • Chimie des matériaux
  • Surfaces et interfaces

Empreinte digitale

Voici les principaux termes ou expressions associés à « Using powder rheology measurements to optimize the mixing time of iron-based premixes for best die filling performance ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource