Passer à la navigation principale Passer à la recherche Passer au contenu principal

Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing

  • National University of Science and Technology "MISiS"
  • École de technologie supérieure

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

12 Citations (Scopus)

Résumé

The thermomechanical processing consisting in severe cold rolling (true strain 0.7-1.9) followed by a post-deformation annealing (200-700°C) is applied to Ti-50.0 and 50.7at%Ni alloys. The thermal stability of the amorphous phase as well as the influence of post-deformation annealing on the structure, substructure and temperature range of martensitic transformations are studied using TEM and DSC techniques. For a given level of cold work, the equiatomic alloy has a higher volume fraction of amorphous phase than the nickel-rich one. For both alloys, the higher the volume fraction of the amorphous phase, the higher the thermal stability. For a given post-deformation annealing temperature, the DSC martensitic transformation peaks from the material subjected to amorphization cold work are sharper and the hysteresis between the direct and reverse transformations is narrower than those for a material subjected to strain hardening cold work. This observation confirms the absence of the well-developed dislocation substructure in the severely deformed alloy subjected to nanocrystallization heat treatment, which is consistent with TEM results.

Langue originaleAnglais
titreSupplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006
EditeurTrans Tech Publications Ltd
Pages1964-1970
Nombre de pages7
EditionPART 2
ISBN (imprimé)0878494286, 9780878494286
Les DOIs
ÉtatPublié - 2007
Evénement5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 - Vancouver, Canada
Durée: 4 juil. 2006 → 8 juil. 2006

Série de publications

NomMaterials Science Forum
nombrePART 2
Volume539-543
ISSN (imprimé)0255-5476
ISSN (Electronique)1662-9752

Conférence

Conférence5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006
Pays/TerritoireCanada
La villeVancouver
Période4/07/06 → 8/07/06

Classification disciplinaire ASJC Scopus

  • Sciences générales des matériaux
  • Physique de la matière condensée
  • Mécanique des matériaux
  • Ingénierie mécanique

Empreinte digitale

Voici les principaux termes ou expressions associés à « Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource